PG 1 Powder gun
Notes:
1. Only those parts have been included in the spare parts list which can be replaced by
the user without difficulty.
2. If a part of the shaft (3) is broken or the High-Voltage cascade in the shaft is defective,
then the complete shaft must be returned to an ITW Gema service centre to be inspected
and/or repaired. The High-Voltage cascade is fitted according to a special
process and therefore should not be dismantled by the user.
3. If the gun cable (12) is defective, the complete gun cable assembly should be returned
for repair.

PG 1 Manual Powder gun, complete
including : Gun cable - 6 m, Rinsing air and powder
hose - 6 m, 40 mm Flat jet nozzle, and small parts set 337 722
PG 1 Manual Powder gun 332 348
3 Shaft assembly, complete with shaft, cascade,
O-rings - Items 20 and 21
- Negative polarity 338 249
- Positive polarity 338 257
5 Cover with hook 330 043
7 Plastic bolt - M8 x 35 mm 328 847
8 Hand grip 330 035
9 Grounding plate 328 863
10 Lock screw - M4 x 10 mm 232 637
12 Gun cable, complete with 6 m cable 328 740
Gun cable, complete with 11 m cable 336 025
12.1 Extension cable for gun cable (Item 12) 334 464
12.2 Cable only (for Item 12) 102 911*
13 7 pin plug 200 085
15 Powder hose connector (with O-ring - Item 20) 333 727
16 Rinsing air connector 328 820
17 Trigger with switching magnet 333 662
18 Spring 331 651
19 Powder tube 333 700#
20 O-ring - ø 13.1 x 1.6 mm 232 670
21 O-ring - ø 6.1 x 1.6 mm 233 099
22 O-ring - ø 7.65 x 1.78 mm 232 564
23 O-ring - ø 10.82 x 1.78 mm 232 556
24 Reed contact 328 910
25 Powder hose - ø 16 / 11 mm 103 128#*
26 Rinsing air hose - ø 6 / 4 mm 100 854*
27 Quick-release connection - ø 6 / 4 mm 200 840
28 Special extractor tool (for Item 19) 340 839
Spiral brush (for Item 19) 333 514